Includes: Gimbal, remote control, 2 batteries, & case
The Ronin 3-Axis Brushless Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 16 pounds, Ronin uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and boasts a precision of control of ±0.02°. An IMU (inertial measurement movement) detects movement and engages the motors to react, using algorithms to differentiate between intentional movement such as pans and tracking shots from unwanted shake. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.
The Ronin supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin to install your own receiver.
As with sled and vest style stabilizers, motorized gimbal systems require balancing before use. Once balanced, you can configure the Ronin for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. Because every camera and lens combination has a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is provided so you won't have to hand-hold the rig during this process.
The included 4S lithium-polymer battery powers the Ronin for up to four hours. It is a "smart" battery, meaning power regulation and protection circuitry is built-in and there is no separate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin battery because of the smart circuitry. Two 12V DC PowerTaps and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin battery to simplify your charging regime and avoid unnecessary added weight.
Includes: Gimbal, remote control, 2 batteries, battery charger, 2 x accessory clamp brackets, 15mm LW bracket and rods, & case
Supports Cameras up to 8 Pounds Precision of Control: ±0.02° Transmitter for Remote Pan/Tilt Control Tool-Less Balance Adjustment System
Ready Rig GS Stabilizer + ProArm Kit
Load Capacity Range of 1-40 lb
Vertical Axis Stabilization
Telescoping Carbon Fiber Support Arms
55" Boom Range
Compatible with Any Gimbal
Operate Gimbal Over- or Underslung
Aluminum & Carbon Fiber Construction
Slim, Compact Design
OConnor 2065 Mitchell Set
Includes: 2065 Head, Ronford standard and baby legs, & hi-hat
The 2065 shares the ergonomic design of OConnor’s higher payload fluid heads. Pan and tilt brakes are conveniently located on the left side of the head – so operation is both intuitive and familiar. The platform is equipped with dual scales, one on each side, and four handle rosettes to allow operation from either side of the head as well as front or back handle mounting.
A handy one-touch platform release lever enables one finger or hand action to undo the safety catch and open the lever, which speeds deployment and location changes in the field.
With a greater payload and drag than its predecessor, this new head weighs just 22.9 lbs. (10.4 kg) and has a payload of 0-71 lbs. (32.2 kg). Because OConnor fluid heads can be counterbalanced down to 0 lbs., they are the perfect tools for the current art of cinematography, where cameras keep getting lighter, lenses keep getting larger, and more accessories are constantly being developed. No matter how a camera setup is configured, OConnor can balance the payload.
Kessler Crane 8' / 12' Jib
Standard Kit: 8'/12' Crane kit with 100mm ball head mount, K-pod tripod, and weights
(Optional add-on: Revolution servo head kit)
EasyRig Vario 5 (11-38lb)
Includes: Vest, support arm, and carrying case. (Optional FC Serene Arm)
The Vario 5 Gimbal Rig Vest from Easyrig is a support system built to handle camera rigs and gimbals with a load between 11 - 38 lb and has a 5" extension arm. With an adjustment screw located on the back, the Vario 5 allows you to adjust the line tension to adapt to many different cameras and configurations. The vest allows you to deliver the same steady hand-held shots, while relieving strain on your back, neck, and shoulders. The load is redistributed to the hips, allowing you to shoot hand-held in comfort for long periods of time.
Adjustable weight range from 11-38 lbs Adjustable line tension for different cameras and configurations Lockable camera hook Vest and waist belt made of breathable material
MYT Works 5' Medium Slider
MYT Glide Medium - 7" rail span, 80lb load capacity. This system comes with a slider dolly track in a 5' length and one camera hi-hat with the mount you need. Choose between a 100mm or Mitchell Mount hi-hat for your Medium MYT Glide camera slider dolly. The slider can be supported on a 100mm or Mitchell tripod or using Jr lowboy stands.
Kessler 3-Axis Second Shooter Kit
Includes: Controller, slider motor, pan & tilt head, motor bracket stealth/cineslider, 2 x MagPak batteries, 2 x Magpak chargers, 2 x Kessler Kwik release plates, 2 x short camera plates
Includes: Fluid head and Speedlock HD tripod with ground or mid-spreaders
The Sachtler 2072 System 20 SB HD CF Carbon Fiber Tripod System consists of the Video 20 SB Fluid Head, ENG-2 CF HD 1-Stage Tripod, SP 100 On-Ground Spreader and ENG/EFP padded transport bag.
Video 20 SB heads guarantee camera operators an extremely high carrying capacity, a twelve step counterbalance system, and a very long balance plate sliding range. In addition, special dust shields prevent dirt particles from penetrating the heads.
The ENG 2 CF is extremely lightweight, solid and stable, and its completely dual tube design ensures it can safely and stably carry tremendous payloads even at its maximum height.
To complete the package, a ground spreader is included for maximum stability and security when working on unstable surfaces, and a padded bag protects the whole system during transport. Stride with confidence with the Sachtler 2072 tripod system as there is little you can't cope with no matter where you go, even in a hurry.
Speed Balance stepped counterbalance system facilitates rapid setup Carbon fiber leg sections are stronger than aluminum while weighing less and efficiently absorbing resonance Ground spreader ensures solid, dependable support of your camera investment
Includes dolly, 75mm and 100mm ball adapters, 6' & 4' speed rail, center track support, 2 x end rail supports. (Jr Low boy stands available)
Three-Axis Motorized Gimbal Stabilizer
Holds DSLR or Mirrorless Cameras
Eight-Pound Payload Capacity
Trigger and Mode Buttons for Control
Includes: Head and carbon tripod & floor spreaders
The Sachtler DV 12SB Fluid Head with a 100 mm bowl and integrated flat base fitting, and a load capacity of up to 31 lbs (14kg), is the choice for the professional videographer utilizing heavy camcorders who demands the smoothest pans and tilts as well as rapid setup. It features a 12-step counterbalance system with a 2.8" (70mm) sliding plate for perfect balance, and 5 steps of drag plus zero in both axes for whip pans. The Touch & Go quick-release system makes mounting and takedown a nonissue: no fumbling, no struggling, no worries. For complete flexibility and ease of operation in unforgiving circumstances, the DV-12SB is a sound choice.
Stepped counterbalance and fluid drag systems facilitate rapid, accurate setups Illuminated bubble level is adjustable between 20 and 45 seconds Touch & Go quick release system ensures rapid, accurate, and secure camera mounting
Kessler Stealth Slider
Includes: 39" Slider, Standard outrigger feet, 100mm Bowl riser, 100mm ball adapter, and travel case
39.5" Portable Slider 31" of Camera Travel Supports up to 15 lb Adjustable Drag Control Compatible with Second Shooter motion control
Filmtools Sr. Cart
Filmtools HD Sr. Liberator Cart w/ 10" main wheels. 8" Removable Wheel Conversion Kit Heavy Duty 30" Nose Upper Backstage 18" x 49" Carpeted Shelf Lower Backstage 18" x 49" Carpeted Shelf Backstage Mitchell mount adapter Backstage Dual Tripod Holder Optional Steadicam mast and bumper pad available